
Luminaire Type:
Catalog Number
(autopopulated):
GOTHAM ARCHITECTURAL DOWNLIGHTING | 1400 Lester Road Conyers GA 30012 | P 800.315.4982 | gothamlighting.com
© 2006-2013 Acuity Brands Lighting, Inc. All Rights Reserved. Rev. 03/24/14. Specifications subject to change without notice.
PAGE 1 OF 3
DTH-4-ADJ-ACCENT
Gotham Architectural Downlighting
HID Downlights
4” DTH
T4/T6 Adjustable Accent
Ceramic Metal Halide Lamp
FEATURES ORDERING INFORMATION NOTES
OPTICAL SYSTEM
• Center Beam optical system centers the lamp relative to the true aperture,
optimizing lamp efficiency.
• Tool-less O°- 40° vertical and 355° horizontal lamp adjustments made with the
trim assembly removed for simple focusing. Lockable adjustment mechanisms
maintain focus during relamping and are visible from below the ceiling with trim
assembly removed.
• Self-flanged, semi-specular or matte-diffuse anodized cone designed to
minimize backflash. Contour cut reduces visibility of inner housing.
• Interchangeable upper reflectors provide narrow, medium and wide distributions.
These preset distribution patterns allow designers to achieve various design
objectives.
• 1/8” thick softening lens eliminates beam striations and ensures maximum
efficiency. Provides required protective shielding.
• Optical system retained by self-aligning torsion support springs.
• Internal housing components painted black.
MECHANICAL SYSTEM
• Black painted housing features tool-less top access and accommodates a
maximum 1-1/2” ceiling thickness.
• Tool-less re-lamp capability from above or below ceiling.
• 16-gauge galvanized steel mounting bars with continuos 4” vertical adjustment
are shipped pre-installed. Post installation adjustment possible without the use
of tools above or below ceiling.
• Galvanized steel junction box with hinged access covers and spring latch. Three
combination 1/2”-3/4” and two 1/2” knockouts for straight-through conduit
runs. Capacity: 8 (4 in, 4 out) No. 12 AWG conductors rated for 90°C.
• Secondary housing adjustment system for precise, final ceiling to flange alignment.
ELECTRICAL SYSTEM
• Tool-less access door provides access to junction box and ballast through the
aperture.
• G12, G8.5 or PGJ5 base ceramic socket.
• Pre-wired, electronic, 120 or 277V ballast module is standard. Assembly can be
attached before or after mounting of mounting/plaster frame.
• Thermally-activated insulation detector.
• 3000 K lamp ships standard.
LISTING
• Fixtures are UL Listed for thru-branch wiring, non-IC recessed mounting and
damp locations. Listed and labeled to comply with Canadian standards.
WARRANTY
• 1-year limited warranty. Complete warranty terms located at:
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
EXAMPLE: DTH T4T 20MHC 4ACT30 N LD 120
Series Lamp type Wattage/Lamp Aperture/Trim color Type Distribution Finish Voltage
DTH T4T
1,2
T4
3
T6
3
20MHC
9
39MHC
70MHC
4AC
Clear
4BC
4
Black
4PC Pewter
4WTC Wheat
T30
Cut for angles 25°-40°
T20 Cut for angles 15°-25°
T00 Cut for angles 0°-15°
N Narrow
M Medium
W Wide
(blank) Semi-specular
LD Matte-diffuse
120
277
347
5
Ballast Options
(blank) Electronic ballast
EMB Electro-magnetic
ballast
QRS
6
Quartz restrike system (uses 100W max. DC base quartz lamp
by others)
QRSTD
7
Quartz restrike system with time delay
EC
8
Emergency circuit (DC socket with leads for connection to
external emergency power source; 100W max. lamp)
SF
Single fuse
TRW White painted flange
TRBL Black painted flange
L/LP Less lamp
RRL
9
RELOC
®
-ready luminaire. Provides compatibility with Lithonia
RELOC system. Access above ceiling required.
CP Chicago plenum
ORDERING NOTES
1. Philips Mini MasterColor
®
available in 20W & 120V only.
2. Available with electronic ballast and 120V only.
3. Available in 39W and 70W only.
4. Not available with finishes.
5. Available with 70W electro-magnetic ballast only.
6. Not available with QRSTD.
7. Not available with QRS.
8. Not available with QRS or QRSTD.
9. For compatible RELOC system, refer to TECH-110.
Komentáře k této Příručce